Wavetronix SmartSensor Matrix (SS-225) - User Guide Bedienungsanleitung Seite 7
- Seite / 117
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
6 INTRODUCTION SMARTSENSOR MATRIX USER GUIDE
ration process is quick and easy. Aer installation, the sensor will require little or no on-site
maintenance and can be remotely congured.
is user guide outlines the step-by-step process of installing and conguring the Smart-
Sensor Matrix. Any questions about the information in this guide should be directed to
Wavetronix or your distributor.
SmartSensor Matrix Package
A standard SmartSensor Matrix package may contain some combination of the following items:
SmartSensor Matrix detector(s) with installed sensor backplate
Sensor mounting kit(s)
SmartSensor 6-conductor cable(s)
Intersection preassembled backplate, Click 650 cabinet interface device or Click 600
cabinet interface device
Click 112/114 detector rack card(s) with patch cable(s)
Click 104 four-channel DIN rail contact closure module
SmartSensor Manager Matrix (SSMM) soware
SmartSensor Matrix User Guide
Note
In addition to the intersection preassembled backplate and the Click 600/650 cabi-
net interface devices, you could also use the preassembled 19-inch rack or the seg-
mented preassembled backplate. The coming chapters will discuss the dierences
between and uses of these various cabinet solutions.
SmartSensor Matrix installations should perform the following functions for the sensor:
AC power conversion – Provides reliable power for the sensors and other components.
is option is normally recommended instead of the DC surge protection because it
will not burden the existing DC power modules.
Surge protection – Protects equipment from surges coming from the power source or
from a cable run.
Remote IP connection – Provides a way (via a Click 301 serial to Ethernet converter, or
onboard Ethernet capabilities) to connect to the sensor from a remote location.
Figure I.2 shows several possible installation setups; these connect the sensor to a controller
by way of the Click 650, the Click 600 or a preassembled backplate. Some of these solutions
also require the use of contact closure cards in an input le rack.
- SmartSensor Matrix 1
- Contents 4
- Introduction 6
- SmartSensor Matrix Package 7
- Selecting a Mounting Location 8
- Sensor Pole 9
- Figure I.3 – Corner Radar 9
- Installing the 12
- In this chapter 14
- Sensor Mounting Guidelines 15
- Front edge of field of view 18
- Grounding the Sensor 20
- Cabinet Solutions 2 22
- Click 650 23
- Click 600 24
- Preassembled Backplate 25
- Wire Color Signal 28
- Channel 31
- Bus 1 Bus 2 31
- Click 112 DIP Switch Settings 32
- Click 112/114 LEDs 35
- Click 104 LEDs 37
- Channel Mapping 38
- Using SmartSensor 42
- Manager Matrix 42
- Installing SmartSensor 44
- Manager Matrix 4 44
- Using the Click 650 45
- Using the Click 600 45
- Using the Click 421 46
- Microsoft .NET Framework 48
- Communication 5 50
- Serial Connection 52
- Internet Connection 54
- Address Book 56
- Virtual Connection 57
- Virtual Sensor File 58
- Communication Error Log 59
- Figure 5.10 – Error Log 60
- Sensor Settings 6 64
- Ports Tab 65
- Figure 6.2 – Comm Tab 66
- Advanced Tab 67
- Lanes & Stop Bars 7 68
- Edit Area 69
- Saved Configuration Overlay 70
- Capturing Lanes and Stop Bars 71
- Menu Bar 72
- Saving the Configuration 73
- Moving the Sensor View 73
- Editing Thresholds 74
- Automatic Configuration 75
- Adding/Deleting/Moving a Lane 76
- Moving a Lane Node 78
- Changing the Lane Arrows 79
- Zones & Channels 8 80
- Placing Zones 82
- Editing Zones 83
- Placing AutoZones 83
- Channel Type 84
- Mapping Zones to Channels 85
- Editing Channels 86
- Output Settings 87
- Measuring Zones 88
- Figure 8.15 – Using Flags 89
- Verification 9 90
- Channel Indicators 91
- Verification Menu Bar 92
- Tools 10 94
- Backup-Restore 95
- Sensor Diagnostics 96
- Tracker Logging 96
- 96 CHAPTER 10 TOOLS 97
- Figure 10.6 – Log File 97
- Using the Rack Card Tool 98
- Firmware Version 99
- Signal Cards Switch 99
- Channel Outputs Switch 100
- Appendix 102
- Creating Custom Cables 103
- Appendix B – Cable Lengths 104
- 104 APPENDIX 105
- Figure C.1 – Click 221 105
- Mounting the Backplate 106
- Connecting AC Power 106
- 106 APPENDIX 107
- APPENDIX 107 108
- 110 APPENDIX 111
- Angle Resolution 112
- 112 APPENDIX 113
- Occlusion 114
- 114 APPENDIX 115
- APPENDIX 115 116
- 116 APPENDIX 117
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.073 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern