Wavetronix SmartSensor 105 (SS-105) - User Guide Bedienungsanleitung PDF herunterladen (Seite 23)

22 CHAPTER 2  CONNECTING POWER AND SURGE PROTECTION

Caution

An authorized electrical technician should perform installation and operation of this

unit. Persons other than authorized and approved electrical technicians should NOT

attempt to connect this unit to a power supply and/or trac control cabinet, as there

is a serious risk of electrical shock through unsafe handling of the power source. Ex-

treme caution should be used when connecting this unit to an active power supply.

Wiring a Circuit Breaker and Switch

e Click 210 is a compact circuit breaker DIN rail device designed to interrupt an electric

current under overload conditions. e breaker is trip-free and can be easily reset after a

current interruption by pushing the reset button.

To add a Click 210 circuit breaker and switch (see Figure 2.5):

1 Mount the Click 210 onto the DIN rail.

2 Connect power in to either side of the module.

3 Connect power out to the other side.

Black (Ground)

Red (+24 VDC)

White (Neutral)

Green (Ground)

Black (Line)

Earth

Ground

Figure 2.5 – AC Surge Protection

Wiring AC Surge Protection

To include AC surge protection in your installation (see Figure 2.3):

1 Mount the Click 230 onto the DIN rail.

2 Connect the line conductor (hot) from the Click 210 to terminal 5 on the IN side of

the Click 230.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 98 99

Keine Kommentare

Wavetronix SmartSensor 105 (SS-105) - User Guide Bedienungsanleitung Seite 23