Wavetronix SmartSensor Advance Extended Range (SS-200E) - Use Bedienungsanleitung PDF herunterladen (Seite 132)

CHAPTER 12  PROGRAMMING CONTACT CLOSURES 131

Note

A Click 100 16-output contact closure module can be used if the cabinet you are con-

necting to does not have an input ﬁle rack.

Select button

Settings switch

Display

Channel button

Channel LEDs

RS-485 ports

Figure 12.2 – Click 172/174 Cards

To program the Click 172/174 contact closure cards:

1 Plug the surge card into the input le rack. Make sure the Settings switch is in the 3

position when plugged in. Wait approximately 20 seconds.

2 Move the Settings switch to the 1 position and aer the auto-baud is complete, the cur-

rent mode will appear.

3 Toggle the Select button to select AC or Actuation mode.

4 Move the Settings switch to the 2 position and wait a few seconds.

5 Move the Settings switch to the 3 position.

6 Wait approximately 30 seconds and then conrm that the detections are registering on

the Channel LEDs.

In many cases, you can put multiple alerts on each channel to avoid the need for more than

1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 147 148

Keine Kommentare

Wavetronix SmartSensor Advance Extended Range (SS-200E) - Use Bedienungsanleitung Seite 132